Premium Essay

Aloha Products Inc.

In: Business and Management

Submitted By ahmadz33
Words 2729
Pages 11
Introduction
The purpose of our report is to provide our analysis, assessment, and recommendations related to Aloha Products (AP) and the current control systems for the manufacturing, marketing, and purchasing departments. Based on the case information, we believe the current implementation of measurements and controls do not best serve the current business strategy of AP. As a result, we have included recommended changes for the three departments that best align with AP’s business model and will create a more thorough and effective measurement for performance for each department and the firm as a whole.
The following subsections of this memo will consider the current situation, the evaluation of current controls and the performance measurements in place, and then provide our alternatives that we believe are more aligned with the organization.

Current Situation
The coffee industry has proven to be volatile and prone to a variety of price drivers and threats. While green coffee is produced year round at least somewhere in the world, harvests are constantly at risk. Weather and insects are constant pests to crops and impact growers all over the world. Inventories have also been negatively affected in the past due to dock strikes restricting the flow of goods from ports. While gourmet and specialty coffees have sold well over the last 30 years, the general liquid consumption trend has shifted away from coffee. This might be attributed to the growing health concerns at the consumer level and the trend to move towards liquids that may better reflect a healthy lifestyle. Given all this downward pressure on the marketplace, it is increasingly difficult for smaller processing companies to compete. This becomes even more difficult when we consider the pricing of inputs and the complex futures market where green coffee is traded. For larger corporations (Maxwell House…...

Similar Documents

Premium Essay

Eecktra Products Inc Case Study

...Webster University Space Coast Region Merritt Island Campus Case Study Report Of Elektra Products, Inc By MNGT 5000 Management Submitted to: October 30, 2012 Synopsis Electra Products, Inc. is a manufacturing and retailer of electrical products and supplies. It is facing difficult times due to loss of market shares as a result of competition and lack of new product ideas. They are also having personnel, communication and morale issues. Mr. Martin Griffin, new CEO, was hired to turn the company around. He started a new campaign of empowerment and decided to divide the managers into different problem-solving teams. He asked they come up with ideas to implement the new campaign. Barbara Russell, Manufacturing vice president, and her team were excited; however, not everyone felt the same way about the new empowerment campaign. Apparently, personnel were discouraged and lost trust in management because of the failed attempts from the past. Some managers did not believe the new campaign of “empowerment” would change anything. During the following meeting, Barbara reported her team’s recommendations. Mr. Griffin received them with enthusiasm but when he left the room, the other department heads found reasons why the changes would not work. Barbara and her team were very disappointed at the other manager’s lack of support. She was wondering what to do next and thought her choices were not easy: talk to Mr. Griffin, work slowly to gain......

Words: 850 - Pages: 4

Free Essay

Aloha Products

...------------------------------------------------- Aloha Products ------------------------------------------------- Case 1 i Kandidatkursen i redovisning 2013-01-30 Grupp 2:4 Annika Kumlin 850619-0209 Emelie Drifalk Errol Elmas 910126-0215 Fredrika Ekman 891108-4104 Företaget Strategi: Företaget Aloha Products bedriver kaffetillverkning i USA sedan över hundra år tillbaka. De är en single-industry-firm alltså enbart verksamma inom en industri – de producerar kaffe. Genom deras fokus på enbart kaffemarknaden har företaget en specialiserad kunskap jämte större konkurrenter om hur man kan få ner kostnaderna både för inköp och i produktionen. Deras kärnkompetens ligger alltså främst i deras effektiva produktionsteknologi som möjliggjort en lågkostnadsstrategi. Organisationsstruktur: I nuläget har Aloha Products en funktionsindelad organisationsstruktur. Företaget består av en inköpsavdelning som till hög grad är autonom och rapporterar direkt till ekonomichefen. De tre fabrikerna, styrda av sina respektive fabrikschefer rapporterar till produktionschefen. Kontrollen i företaget är centraliserad vilket innebär att all övergripande beslutsfattning tas högt upp på företagshierarkin. Detta gäller framförallt produktionsbesluten då fabrikscheferna själva har liten beslutsfrihet. I stället tilldelas de produktionsscheman där det på förväg är specificerat hur mycket som skall produceras och till vilken kostnad råvaran ska tas upp. Samtidigt består......

Words: 2432 - Pages: 10

Free Essay

The Recalcitrant Director at Byte Products, Inc.: Corporate Legality Versus Corporate Responsibility

...The Recalcitrant Director at Byte Products, Inc.: Corporate legality versus corporate responsibility About the Company BYTES PRODUCTS, Inc. is an American based company involved in the production of electronic components incorporated in personal computers, mostly used for business and engineering applications. The company has three plants at different locations in the U.S.A, which totals a current sale of about $265 million and has a market share of approximately 32%, making them the leader in the industry. Summary Mr. James M. Elliot, the CEO and Chairman of the Board at Bytes Products, Inc, noticed that the company was beginning to face a number of crises. The existing three plants run on a 3–shift working schedule of 24hours a day and 7 days a week using up all possible production hours. It has now come to the attention of Mr. Elliot that even if the three existing plans are running at its maximum production level, there is still a high product demand percentage that is not being met. The company’s overall supply is unable to meet the demands of its customers which can cause a negative impact on the company’s by not being able to maintain its current market share. Therefore, because of this dilemma Mr. Elliott has returned to the drawing board in search of a solution to this problem. Mr. Elliott then made the decision to construct another manufacturing plant to produce sufficient product to meet the demands of the customers. In order for this new manufacturing......

Words: 1425 - Pages: 6

Premium Essay

Cisco Systems, Inc.: Collaboration on New Product Introduction

...Cisco Systems, Inc.: Collaboration on New Product Introduction Viking Project Cisco 1. What are the challenges and risks faced by technology companies in new product introduction? When an introducing new product there are several challenges and risks that technology companies face and must take into account before starting development. The technology industry is rapidly changing with new technology being developed and introduced every day. Therefore, time is of most importance and indeed a challenge that technology companies face. There were several examples of ´time to market pressure´ in the case of Cisco Systems Inc. While their new product took several years of development work they had a deadline they had to meet and launch the product extremely quickly, or else they faced the risk of losing market share. In these years of development, new product introduction can be very expensive where companies usually risk spending a lot of money and make large number of prototypes with little certainty that the product design will meet customer requirements. When the product finally enters the market, customers might already have a product that fulfills their needs or they might not even want such a product any longer since the industry is in constant change. Thus, a two-way street with customers is very important in a product´s development as mentioned in the case. Furthermore, in our globalized world today, technology companies also face the challenge of making a design that......

Words: 2380 - Pages: 10

Premium Essay

Sterling Marking Products, Inc.

...understand management’s concerns regarding focusing on new product innovation and managing a foreign branch, I am confident that these can be addressed and that revenues can increase. After analyzing various costs, benefits, and firm factors, I recommend that we proceed with a wholly owned subsidiary in the UK, while continuing to research opportunities in other markets (Exhibit 1). A subsidiary would contribute additional profits of over $1.4 million in the first year, while allowing us to maintain our focus on a quality product, customer service and employee satisfaction (Exhibit 2). Additionally, our experience in the US taught us that a lack of involvement in marketing and selling activities could result in lower sales, despite strong market potential. We need to maintain control over techniques used in selling our product to achieve optimal sales results as well as to enforce our strict product specifications. It is also important that we act in a timely fashion, as while the UK is currently the only EEC country where seals are a legal requirement for corporations, it might not be a legal requirement in future. Its currency is also strong at the moment, with £1 = CAN $2.10, an indicator of economic stability and potential growth. While licensing was also considered an option, there is a legitimate concern based on past behavior that the primary contender, MBF McFarlane, would copy Sterling’s strategies and product. Upon termination of the licensing......

Words: 1122 - Pages: 5

Premium Essay

Elektra Products, Inc.

...Questions 1. Why is innovative management important and how have Walmart’s leaders demonstrated innovation throughout the company’s history? Innovation management is the discipline of managing processes in innovation. It can be used to develop both product and organizational innovation. Innovation management includes a set of tools that allow managers and engineers to cooperate with a common understanding of goals and processes. The focus of innovation management is to allow the organization to respond to an external or internal opportunity, and use its creative efforts to introduce new ideas, processes or products. Importantly, it involves workers at every level in contributing creatively to a company's development, manufacturing, and marketing. By utilizing appropriate innovation management tools, management can trigger and deploy the creative juices of the whole work force towards the continuous development of a company. The process can be viewed as an evolutionary integration of organization, technology and market by iterating series of activities: search, select, implement and capture. In 1960s, Sam Walton (founder of Wal-Mart) achieve higher sales volumes by keeping sales price lower than his competitors by reducing his profit margin. He relied on them to give customers the great shopping experience that would keep them coming back. “If we work together,” he said, “we’ll lower the cost of living for everyone… we’ll give the world on opportunity to see what it’s......

Words: 406 - Pages: 2

Premium Essay

Alden Products, Inc. – European Manufacturing

...smaller country-oriented plants. Other than that the cost of building a centralized manufacturing plant would be at least US$500,000 less than the cost of adding an equivalent amount of capacity to existing facility. The consolidated plant would also help Alden-Europe to reduce its reliance on outside suppliers and gain more control over its total cost by justifying an on-site polymer plant and large-scale processing and storage facilities in it. The annual cost of operating the new plant also would be considerably less than the total cost of operating separate plants. Moreover, the centralized plant would be able to ensure standardized quality. Lastly, the centralized plant would speed up development, debugging and introduction of new products. Thus, with all this reasoning and logic we can say that making a consolidated production facility was a rational decision and beneficial for API. 2. What is your evaluation of the Uniplant’s performance during the 1980s? During this era Uniplant faced a lot of difficulties and problem. Petrol prices and the basic hourly wages rose exponentially between 1970 and 1988. Holland overall cost of living also rose by 70% during the period of 1975-1988. However in spite of all that Uniplant’s average unit cost increased only by 50% and was about Dfl. 2.5. This was done by purchasing raw material from various countries rather than only Holland. During 1980s, Uniplant was made to operate at 70% of capacity because transportation cost......

Words: 1105 - Pages: 5

Premium Essay

Cisco Systems, Inc.: Collaboration on New Product Introduction

...high cost of financing had seriously affected the growth in the textile industry. REESE, LOEW, & STEFFGEN, (2013) examined that social norms enhance pro-environmental behavior in Hotels. They analyzed hotel guest’s towel-used during their stay, they also studied tests whether messages employing provincial norms were more effective in reducing towel-use than standard environmental messages. Siddiquee, Hosne Asif, & Rahman, (2014) examined the terry towel industry in Bangladesh. The aim of this study was to increased the knowledge of terry products scope, products demand and supply, buyer or market of products, product range, export volume, trend and revealed other opportunities, strength, threat etc of this sector. They found that Bangladesh is the number one choice of the importers for higher quality with low price of terry product specially terry towel. References: Ahmed, A. (2011). GROWTH TRENDS OF PAKISTAN TEXTILE INDUSTRY. Pakistan Textile Journal . Brosekhan, A. A., & Velayutham, ,. D. (n.d.). Consumer Buying Behaviour – A Literature Review. IOSR Journal of Business and Management (IOSR-JBM) , 08-16. Hanley, S., & Leahy, R. (2008). The Effectiveness of Relationship Marketing Strategies in Department Stores. lnternational Journal of Business and Management , 133-140. Khan, A. A., & Khan, M. (2010). Pakistan Textile Industry Facing New Challenges. Research Journal of Internatıonal Studıes , 21-29. KOLLAT, D.......

Words: 848 - Pages: 4

Free Essay

Aloha Tofu

...Aloha Tofu Aloha Tofu started in 1950 when Kamesaburo and Tsuruko Uyehara took over control of a friend's tofu factory. At the time, Kamesaburo only wanted to support his family. Now Aloha Tofu is the largest tofu producer in Hawaii. The company aims to provide fresh tofu to the Hawaiian islands. Their logo (Appendix 1) is a japanese mon, or crest, made of a crane and a turtle. Both symbolize longevity and are taken from the founders' grandparents' names. The first factory was on Dillingham Boulevard. In 1964, they changed location to Ala Moana Farmers Market until a fire destroyed the factory. They rebuilt that factory and in 1976 the Uyehara family built a new factory in Kalihi. The plant tour (Appendix 2) illustrates the way Aloha Tofu produces their firm tofu. This type of tofu is unique because it absorbs more flavor and will stay the same shape if it's “fried, broiled, grilled or boiled”. It can be used in many different kinds of recipes, and as a meat substitute in many cultural foods. The tofu start out as soybeans. They are put in 2 hoppers overnight where they soak for 6-8 hours. At this point they double in size and are then placed into a grinder (0:41). It is then placed into 2 cookers for 40-45 minutes. At this point some of the liquid is removed from the crushed soybeans. The okata is removed because it doesn't work to make the tofu (1:08). The remainder is soymilk, which is then given a coagulant (nigari, a form of magnesium chloride and calcium......

Words: 755 - Pages: 4

Premium Essay

Printware Products Inc.

...Printware Products Inc. produces printers for wholesale distributors. It has just completed packaging an order from Hawes Company for 450 printers. Before the order is shipped, the controller wants to compare the unit costs computed under the company’s new activity-based costing system with the unit costs computed under its traditional costing system. Printware’s traditional costing system assigned overhead costs at a rate of 240 percent of direct labor cost. Data for the Hawes order are as follows: direct materials, $17,552; purchased parts, $14,856; direct labor hours, 140; and average direct labor pay rate per hour, $17. Data for activity-based costing related to processing direct materials and purchased parts for the Hawes order follow. [pic] .:. Required 1. Use the traditional costing approach to compute the total cost and the product unit cost of the Hawes order. 2. Using the cost hierarchy, identify each activity as unit level, batch level, product level, or facility level. 3. Prepare a bill of activities for the activity costs. 4. Use ABC to compute the total cost and product unit cost of the Hawes order. (Round your answer to the nearest cent.) 5. What is the difference between the product unit cost you computed using the traditional approach and the one you computed using ABC? Does the use of ABC guarantee cost reduction for every order? SOLUTION: | |1. |Hawes Order: | ...

Words: 404 - Pages: 2

Premium Essay

Aloha Products

...CASE 2 – ALOHA PRODUCTS Background Point of View Problem Statement Framework for Analysis Analysis 1. Evaluate the current control systems for the manufacturing, marketing and purchasing departments of Aloha Products. Aloha Products maintains a centralized control system, which does not give the plant managers enough control on any major activities of the production facility. Specifically, plant managers have no jurisdiction and influence on the processes before and after the products reach the facility. These processes include purchasing, production and sales or marketing. Since plant manager have almost no control over their inputs and outputs, their respective plants cannot perform up to their most profitable state. However, plant managers are evaluated on the basis of performance of their respective plants. This structure is not rational as they are held accountable to roasting plants where they almost have no control over it. The company has a cost center approach although its current management control system measures the roasting plants as profit centers. This inconsistency leads to incorrect profit center measurements. Since the current measurement system is inappropriate, the evaluation of the plant manager should not be associated with the company’s gross margin. And if management wants to drive the company’s overall performance, a new measure should be developed in evaluating the plants’ individual output. 2. Considering the......

Words: 515 - Pages: 3

Premium Essay

Avie Products Inc. Case Study

...for its products? I would use the quantitative approach, because the trend analysis is a key factor in situations like these. We want to look at the history of sales in this area, and if it’s smart to hire more based on the last few years sales. What HR planning would assist Avie in determining how many additional workers it would need for the third shift? Staffing tables would be the best way to determine how many people we will need to hire because it is a graphic representation of Avie Inc. jobs, and shows how many people are currently working. This helps when choosing future employees because you physically see what you need and what you don’t need, which is helpful when forecasting jobs. Assume that Avie goes ahead with the third shift. What can the company use to evaluate the effectiveness of this strategy in a year’s time? One way that Avie can compare the effectiveness is by using benchmarking, benchmarking allows Avie to compare their year’s strategy to their competitors. This shows how they have progressed and how effective the strategy really was. If the demand for Avie’s product should drop in the future and the company is required to lay off some of the staff on the third shift, what would be the best way to determine who, on this shift, should be laid off? (Note that Avie is not unionized.) When laying off people Avie should consider the seniority of their employees, next they should look at the abilities of their workers. Due to Avie Inc. not......

Words: 333 - Pages: 2

Premium Essay

Case Study: Electra Products, Inc.

...following is an example of the process involved in writing a Case Study paper. The Case Study is found at the end of Chapter 1 of your textbook; Elektra Products, Inc. Items in red font are explanatory notes and would not be included in the finished product. Charles A. Student         20 Nov 2011 Elektra Products, Inc. The following summary identifies the basic substance of the situation, the key individuals involved, and the dilemma faced by the responsible manager. Summary: Barbara Russell, Elektra's Vice President of Manufacturing, has been tasked by Martin Griffin, Elektra's new President, to head one of the teams that will devise a plan to change Elektra's management style from a traditional top-down firm to a de-centralized organization that emphasizes employee empowerment in the management process. Ms. Russell forms an enthusiastic team that works extra hours to compile management changes that would allow employees at all levels to make decisions appropriate to their positions. However, When the recommendations are presented to department heads, they receive a cold reception when Mr. Griffin is called away from the meeting. Ms. Russell is now faced with the problem of implementing change against the resistance of the mid-level management. Question 1: How might top management have done a better job changing Elektra Products into a new kind of organization? What might they do now to get the empowerment process back on track? Note: Question 1 asks two......

Words: 604 - Pages: 3

Premium Essay

Elektra Products, Inc.

...Electra Products, Inc. is 80-year old company that lost leadership in manufacture and retailing electrical products and supplies. The biggest company issue is innovation and very low morals of employees and managers. Condition in the company has to be radically changed. The leaders have to understand that in these days you have to be open into new technology, increase the efficiency of employees, control economic and political environment. Traditional way of running company will not keep organization as a leader anymore. New CEO, Martin Griffin has to confront all companies problems. At the first meeting he had to confront employees disinterest and skepticism to the new idea. He tries to motivate employees with a fresh new approach. Empowerment and involvement were associated more as a problem for employees than new opportunity and chance to increase efficiency. Barbara Russell was the only enthusiastic employee. She was excited about new idea, teamwork and chance on putting manufacturing section once again on track. Her excitement turned to the other workers. They put a lot of effort to do their project, for the first time they felt important and for the first time they really start trust to each other. Barbara’s team shows that people in the company can make changes. They are very good employees, but because of company situation and low morals nobody is putting more effort to their jobs. They need a leader that will mobilize them and show them right way to fallow.......

Words: 638 - Pages: 3

Premium Essay

Cisco Systems, Inc.: Collaborating on New Product Introduction

... CISCO SYSTEMS, INC.: COLLABORATING ON NEW PRODUCT INTRODUCTION On November 13, 2007, more than 100 employees of Cisco Systems, Inc. assembled in classic Cisco fashion: they dialed in from multiple locations around the world for an important meeting. The purpose of the gathering was to get the green light from senior management to manufacture a new high-end router that would make the giant networking company more competitive in an age of surging Internet traffic.1 The project’s code name, Viking, said it all. The router for broadband service providers would break ground in power and speed, reminiscent of the Norse warriors and explorers of Europe during the eighth to eleventh centuries. The meeting represented a culmination of several years of development work by a cross-functional, global team of Cisco specialists in engineering, manufacturing, marketing and other areas. Just months earlier, in mid-2007, Cisco overhauled the project by sharply boosting the router’s speed and capacity. This would allow the company to leapfrog competitors and offer a low-cost, powerful new router platform for the next 10 to 15 years. That day in November, the Viking team was seeking an “execution commit” from senior management in manufacturing. If it got the go-ahead, Cisco would be ready to commit the resources to launch the new product. But the Cisco team knew it faced many challenges. The Viking project would be one of the company’s most complex new product introductions......

Words: 12040 - Pages: 49

Noah Jupe | Nie ma to jak hotel / The Suite Life of Zack and Cody | Инструмент для очистки камеры