Premium Essay

Electrical Hazards and Safety in Electrical Installations

In: Computers and Technology

Submitted By kksharma
Words 5690
Pages 23
Electrical Hazards and Safety in Electrical Installations
K K Sharma
Lingaya’s University, Faridabad, Email: krishan_ksharma@yahoo.com

Abstract:

“Electrical Safety is not an option — it is absolutely necessary for workers and employers alike”.

Safety in the workplace is job number one for employer and employee alike. It is especially important for those who install and service electrical systems. Nothing can replace a worker or loved one that has died or suffered the irreparable consequences of an electrical accident. No matter how much an employer tries to safeguard its workers or how much safety training is provided; the ultimate responsibility lies with the worker. The human factor is part of every accident or injury.

The purpose of this paper is to identify electrical safety hazards and present ways to minimize or avoid their consequences. It is a guide for improving electrical safety and contains information about governmental regulations, industry-accepted standards and work practices. It presents ways to meet the standards and reduce the hazards.

I. Introduction

Electricity is very useful and has become essential in modern life. Electric power is used in houses, farms, factories, public places, and commercial establishment and practically in every working place for lighting, operating appliances and machines, heating, cooling, chemical process and transport etc. Electricity is a very good servant but a very dangerous master. Proper precautions will render its use a safe.

Dangers from electricity are due to:

1. Electric shocks resulting in burns, injury, death
2. Electric flashovers resulting I deaths, fires and damages
3. Electric faults resulting in arcing, explosives and fires,
4. Explosive in electrical equipment resulting in damages to installations and deaths
5. Fire hazards resulting in destruction,…...

Similar Documents

Free Essay

Electrical Safety

...Electrical Hazards Analysis Dennis K. Neitzel, CPE Senior Member, IEEE AVO Training Institute, Inc. 4271 Bronze Way Dallas, Texas 75237 Notice: This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of AVO Training Institute's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it. Abstract The subject of electrical hazards analysis has been recognized by a small segment of the electrical industry for many years. The petrochemical industry and many government institutions have performed research on this subject for over twenty years. For the most part however, the electrical industry, at least at the user level, has largely ignored the subject, essentially reacting to catastrophic accidents, rather than proactively trying to predict and prevent them. Recent changes in consensus standards, along with a better general understanding of the seriousness of electrical hazards have resulted in a renewal of interest in the subject. As the awareness of electrical hazards increase many are puzzled by phrases like; “Limited”, “Restricted”, and “Prohibited......

Words: 4087 - Pages: 17

Premium Essay

Electrical Hazards and Safety

...5/3/2014 Electrical Hazards and Safety in Electrical Installations - Research Papers - Kksharma Login Join The Research Paper Factory Join Search Browse Saved Papers Search over 100,000 Essays Home Page » Computers and Technology Electrical Hazards and Safety in Electrical Installations In: Computers and Technology Electrical Hazards and Safety in Electrical Installations Electrical Hazards and Safety in Electrical Installations K K Sharma Lingaya’s University, Faridabad, Email: krishan_ksharma@yahoo.com Abstract: “Electrical Safety is not an option — it is absolutely necessary for workers and employers alike”. Please login to view the full essay... Safety in the workplace is job number one for employer and employee alike. It is especially important for those who install and service electrical systems. Nothing can replace a worker or loved one that has died or suffered the irreparable consequences of an electrical accident. No matter how much an employer tries to safeguard its workers or how much safety training is provided; the ultimate responsibility lies with the worker. The human factor is part of every accident or injury. The purpose of this paper is to identify electrical safety hazards and present ways to minimize or avoid their consequences. It is a guide for improving electrical safety and contains information about governmental regulations, industry-accepted standards and work practices. It presents ways to meet the standards and......

Words: 476 - Pages: 2

Premium Essay

Electrical Saftey

...ELECTRICAL SAFETY Safety in the workplace is job number one for employer and employee. It is especially important for those who install and service electrical system. Electrical safety defines as “Recognizing hazards associated with the use of electrical energy and taking precautions so that hazards do not produce injury or death”. Nothing can replace a worker or loved one that has died or suffered their reparable consequences of an electrical accident. Government statistics shows that electricity cause more than 20,000 fire a year, almost half of all accidental UK house fire. Each year, about 70 people are killed and 350,000 are seriously injured due to an electrical accident in the UK. Modern living has meant we use more and more electrical appliances in the home. For instance, just 20 years ago the average uk home had a hi-fi system and one TV whereas today it is more likely that there are at least two TVs, games console, microwave and computer.so that risk of electricity accidents in the homes are more higher than before. It has seen in the UK that there are lots of people drying their cloths on electrical heater. This is particularly dangerous and could cause electric shock or fire. Heater have ventilation slots to prevent overheating. If this slots are covered up, the appliance could over heat and catch fire. Many time people are drilling the wall to fix nail without knowing......

Words: 965 - Pages: 4

Free Essay

Electrical Design

...Electrical services design Institution Student name Introduction The need for electricity has been ever increasing. As well, the numbers of critical or sensitive loads have also increased. Today, the electricity transmission and distribution is greatly affected by this ever growing need. On the other hand, the consumer's demand has also been in a rising manner. These problems can be catered for by the use of energy storage devices, renewable energy and use of distributed generation. Micro-grid paradigm can deal effectively with the ever increasing electricity needs. This paradigm is bestowed with the ability to regulate the electricity flow. This is achieved through the generation and distribution mechanisms. Grid refers to different interconnection of different electricity transmission lines. The line does not necessarily need to be transmitting electricity of equal magnitudes. But the electricity of different magnitude that runs from the highest to the lowest magnitude possible. In short, the grid connects the consumers to the electricity supply utilities (Vittal & Ayyanar, 2013, pg. 162). The renewable energy integration into the main grid can take place in the distribution or at the transmission levels. The point at which integration takes place depends on the size or the scale of the electricity generation. Large generating stations directly feed the main grid. Unlike large generating stations, the small distributed generations feed the low or medium voltage......

Words: 1761 - Pages: 8

Free Essay

Engine Electrical

...“Engine Electrical” Engine electrical – various pieces of equipment are necessary for starting the engine and operating it in a stable manner battery – it serves as a power supply for the electrical parts of the vehicle starting system – system that responsible for the start of the engine charging system – system that generate electricity used in the vehicle and charge the battery ignition system – system to ignite the compressed air-fuel mixture ignition switch – main switch of the ignition Battery: battery – the battery is the primary “Source” of electrical energy of a vehicle. it stores chemicals not electricity. two different types of lead in an acid mixture react to produce electrical pressure. chemicals inside the battery: * lead or sponge lead (negative plate) * lead peroxide (positive plate) * sulfuric acid and water (electrolyte) battery functions: 1. engine off – battery energy is used to operate the lighting system and accessory system 2. engine starting – battery energy is used to operate starter motor and provide current for ignition system during cranking 3. engine running – battery energy can be needed when the electrical load exceed the supply from charging system types of battery: * conventional type * low maintenance battery * high maintenance battery * free maintenance battery * hybrid battery * recombination battery battery service: * cleaning * jump-start * charging * adding......

Words: 1477 - Pages: 6

Free Essay

Fiber Optic Safety and Installation

...• PPE This acronym stands for Personal Protective Equipment. This term refers to the necessary equipment or goods that will ensure the safety of the individuals installing the wires and the individuals using them later for maintenance and other purposes. This equipment includes helmets, protective clothing, goggles, and other equipment or garment or that is designed for the sake of protecting the workers from injury. • Safe Work Habits The very first step that needs to be taken is to ensure that the optic fiber and copper cables that are about to be installed should comply with all the three requirements that includes the federal regulations, the international standards and the companies requirements. It is also important to wear your PPE and have the proper tools needed for the job. These are the safety rules that need to be followed with fiber optic and copper cable installation: 1. Keep all food and beverages out of the work area. If fiber particles are ingested they can cause internal hemorrhaging 2. Wear disposable aprons to minimize fiber particles on your clothing. Fiber particles on your clothing can later get into food, drinks, and/or be ingested by other means. 3. Always wear safety glasses with side shields and protective gloves. Treat fiber optic splinters the same as you would glass splinters. 4. Never look directly into the end of fiber cables until you are positive that there is no light source at the other end. Use a fiber optic power meter......

Words: 2063 - Pages: 9

Free Essay

Electrical

...ELE 499 Project Work / Practice School (Academic Year 2009 – 2010) Dept of Electrical and Electronics Engg Manipal Institute of Technology, Manipal University Technology Dr. P. Giridhar Kini, Coordinator, Project Work / Practice School (2009 – 2010) Department of E & E Engg, Manipal Institute of Technology, Manipal University, Manipal 576 104, Karnataka, INDIA Official email: mitee.pwps2010@manipal.edu Contents • Project Basics • Project Selection • Project Statistics at a glance • Directors Notice dated Sept 15, 2009 • Project Activity Details Dept Details p Dept Faculty Details Internal project activity process External project activity process Evaluation pattern Dates to remember Documents Checklist General Advise Best Practices Contact details C t t d t il Department of Electrical & Electronics Engg, Manipal Institute of Technology, Manipal 02 Project Work … • What is … activity that enables the demonstration of a student(s) ability to use his / her skills for a real life situation Study on a specific area / problem that adds to the knowledge base Rigorous activity to acquire & apply appropriate research & thinking skills Innovative and original work Not a reproduction / repetition of anybody’s work Department of Electrical & Electronics Engg, Manipal Institute of Technology, Manipal 03 Objectives of Project Work • Unique opportunity to solve “REAL LIFE PROBLEMS” REAL PROBLEMS • Rich diversity of issues,......

Words: 3534 - Pages: 15

Premium Essay

The Electrical Genie

...The Electrical Genie Keith L Mayers Jr University of Phoenix The Electrical Genie Customers often have a poor opinion of electrical, plumbing, and HVAC contractors on a broad spectrum of misfortunate incidences. At The Electrical Genie LLC we try our best to reverse the public’s opinion one visit at a time. With a clear vision, a strong mission statement, and an even stronger set of values, our crews at The Electrical Genie are setting new standards in electrical service. In the proceeding, The Electrical Genie will touch on some basic products and services, define the targeted customer base, and product differentiation. In addition, with the creation of a new mission and vision statement; where does The Electrical Genie LLC see it’s self in the future. Define some defining principles or values considering but not limited to culture, social responsibility, and ethics. Analyze how the vision, mission, and values guide the organization’s strategic direction, and evaluate how the organization addresses customer needs and critique how they achieve a competitive advantage. At The Electrical Genie LLC we clearly understand the need for the reinvention of customer support and satisfaction. With a strong back bone of values The Electrical Genie will help your worst electrical disaster disappear like a wish from a Genie. Define your business and the mission statement For the past 10 years Keith L Mayers Jr has been a master electrician with AMTECK Electrical LLC. He is......

Words: 1403 - Pages: 6

Premium Essay

Safety Awareness in Electrical Engineering

...Safety Awareness in Electrical Engineering It is important for students studying to become electrical engineers to be aware of electrical safety measures and hazards. There are several severe, even life-threatening hazards that one could encounter when among electrical equipment. Two main dangers related to dealing with electrical equipment shocks and burns are overloading outlets with too many devices, and neglecting to implement the usage of a Ground-Fault Circuit Interrupter. While outlets are designed to handle multiple plugs, it is crucial to know that they do have limitations as far as what they are capable of supporting. Various dangers can occur by overloading an outlet. Risks of electrical fires are increased when two or more appliances are plugged in at once, or when extra electricity is required by means of an extension cord. This is also the reason why major appliances such as refrigerators and dryers should be plugged directly into their own outlet; they are heavy power users. Although most homes and appliances have fuses as a form of safety to prevent fires, people should still be aware of the amount of power can be placed on each outlet or circuit. A safety procedure that could potentially be life-saving is the usage of a ground-fault circuit interrupter (GFCI). It protects people from electrical shocks by monitoring the amount of current flowing in a circuit (from hot to neutral), and thereby locating a loss of current. If it senses an imbalance, the...

Words: 395 - Pages: 2

Premium Essay

Jones Electrical

...Current Position Jones Electrical Distribution (hereinafter Jones Electric) is currently facing an issue with cash flows, which will ultimately affect the overall profitability and growth potential for the company. The owner, Nelson Jones, is diligent in paying his suppliers within ten days in order to capitalize on a two percent early pay discount, but in doing so, has over-extended cash flows. Though the company has been profitable and growing over the past three years, its current lender, Metropolitan Bank, will not increase a line of credit (LOC) beyond $250,000, a LOC upon which Jones has recently fully drawn. In order to ease the tensions of depleting cash reserves, Jones is seeking a higher LOC from another lender, Southern Bank & Trust (SB&T). A higher LOC will not only cover overhead expenses and take advantage of early pay discounts, but could also be invested in the continued growth of sales, as well as, potentially opening new locations. After weighing his options, Jones is convinced that he has to take on more debt in order to keep the business moving forward. Thus far, Jones is only contemplating one financing option, a higher LOC from SB&T. The terms of LOC are not favorable when weighed against Jones’s objective to grow the business. SB&T will limit the drawable amount, control investments in fixed assets, and control Jones’s withdrawal of funds from the business. As such, Jones needs to reconsider SB&T’s offer and consider other financing......

Words: 2036 - Pages: 9

Premium Essay

Electrical Safety in Construction Buildings, Its Hazards and Precautions

...Government of India Ministry of Power **** ULTRA MEGA POWER PROJECTS 1.0 Background 1.1 Development of Ultra Mega Power Projects (UMPPs) has been identified as a thrust area. These are very large sized projects, approximately 4000 MW each involving an estimated investment of about Rs. 16,000 crore. These projects will meet the power needs of a number of States/ distribution companies located in these States, and are being developed on a Build, Own, and Operate (BOO) basis. In view of the fact that promotion of competition is one of the key objectives of the Electricity Act, 2003, and of the legal provisions regarding procurement of electricity by distribution companies, identification of the project developer for these projects is being done on the basis of tariff based competitive bidding. Guidelines for determination of tariff for procurement of power by distribution licencees have been notified in January 2005 under the provisions of the Electricity Act, 2003. The Power Finance Corporation (PFC), a PSU under the Ministry of Power, has been identified as the nodal agency for this initiative. 1.2 Salient features of the Plant and Choice of Technology · The Ultra Mega Power Projects would use Super Critical Technology with a view to achieve higher levels of fuel efficiency, which results in saving of fuel and lower green-house gas emissions. · Flexibility in unit size subject to adoption of specified minimum Supercritical parameters. · Integrated power project with......

Words: 2896 - Pages: 12

Premium Essay

Electrical Electronics

...UNIVERSITY OF KERALA B. TECH DEGREE COURSE 2008 SCHEME ELECTRICAL AND ELECTRONICS ENGINEERING I to VIII SEMESTER SCHEME AND SYLLABUS BOARD OF STUDIES IN ENGINEERING AND FACULTY OF ENGINEERING AND TECHNOLOGY UNIVERSITY OF KERALA B.Tech Degree Course – 2008 Scheme REGULATIONS 1. Conditions for Admission Candidates for admission to the B.Tech degree course shall be required to have passed the Higher Secondary Examination, Kerala or 12th Standard V.H.S.E., C.B.S.E., I.S.C. or any examination accepted by the university as equivalent thereto obtaining not less than 50% in Mathematics and 50% in Mathematics, Physics and Chemistry/ Bio- technology/ Computer Science/ Biology put together, or a diploma in Engineering awarded by the Board of Technical Education, Kerala or an examination recognized as equivalent thereto after undergoing an institutional course of at least three years securing a minimum of 50 % marks in the final diploma examination subject to the usual concessions allowed for backward classes and other communities as specified from time to time. 2. Duration of the course i) The course for the B.Tech Degree shall extend over a period of four academic years comprising of eight semesters. The first and second semester shall be combined and each semester from third semester onwards shall cover the groups of subjects as given in the curriculum and scheme of examination ii) Each semester shall ordinarily comprise of not less than 400 working periods each of 60......

Words: 36386 - Pages: 146

Premium Essay

Electrical Installation Standards

...Republic of Kazakhstan, as of August 26, 2004.) REGULATIONS ON ELECTRICAL INSTALLATIONS OF THE REPUBLIC OF KAZAKHSTAN (PUE) Astana, 2003 TABLE OF CONTENTS SECTION 1: GENERAL REGULATIONS 10 CHAPTER 1.1: GENERAL 10 SCOPE, TERMS AND DEFINITIONS 10 GENERAL REGULATIONS FOR INSTALLATION OF ELECTRICAL EQUIPMENT 11 CONNECTION OF ELECTRICAL INSTALLATIONS TO THE POWER STATIONS 13 COMMISSIONING OF ELECTRICAL INSTALLATIONS 14 CHAPTER 1.2 POWER SUPPLY AND POWER SYSTEMS 14 SCOPE, DEFINITIONS 14 GENERAL REQUIREMENTS 14 CATEGORIES OF POWER CONSUMING DEVICES AND RELIABILITY OF POWER SUPPLY 15 VOLTAGE LEVELS AND CONTROLS, REACTIVE POWER COMPENSATION 16 CHAPTER 1.3 SELECTION OF CONDUCTORS: HEATING, CURRENT DENSITY AND CORONA DISCHARGE CONDITIONS 16 SCOPE 16 SELECTION OF CROSS-SECTION OF CONDUCTORS: HEATING 17 MAXUIMUM CONTINUOUS CURRENTS FOR WIRES, CORDS AND CABLES IN RUBBER OR PLASTIC INSULATION 18 MAXIMUM CONTINUOUS CURRENTS FOR CABLES IN IMPREGNATED PAPER INSULATION 22 MAXIMUM CONTINUOUS CURRENTS FOR BARE WIRES AND BUSES 29 SELECTING CROSS-SECTION OF CONDUCTOR PER THE ECONOMIC CURRENT DENSITY 33 CONDUCTOR CORONA AND RADIO FREQUENCY TESTS 36 CHAPTER 1.4 SELECTION OF ELECTRICAL EQUIPMENT AND CONDUCTORS FOR SHORT CIRCUIT......

Words: 177034 - Pages: 709

Free Essay

Electrical Power

...Electrical Power Assignment 1 Task 3 – Q4 3 Phase Transformer Construction Diagram Description As shown in the diagram above, a three phase has three sets of iron cores instead of the one of a single phase transformer. Each ‘leg’ of the transformer has its own primary and secondary windings. Each primary winding will have the same amount of coils as will each secondary winding. The three primary windings (shown above as P1, P2 and P3) and the secondary windings (shown above as S1, S2 and S3) can be connected in either a star or delta arrangement to give a required output. Also the output could be wired in a zigzag arrangement for special purposes where a phase shift of 30° is required. Core Types There are a few different types of core that are used in transformers, some are described below: Solid Cores Solid cores are just made of solid iron and are used in circuits such as switch mode power supplies which operate above mains frequencies and even up to a few kHz. The materials used in these cores combine high magnetic permeability with high electrical resistivity. Laminated Steel Cores These cores are made from layers of high permeability silicon steel and are usually used at power and audio frequencies. They are used because in a solid core at high frequencies ‘eddy currents’ are formed. The laminations confine eddy currents inside each lamination and so decrease the losses. Air Cores An air core is simply a transformer without any core......

Words: 2471 - Pages: 10

Free Essay

Research Paper on Safety Measures for Electrical Fire

...Consumer fire safety: European statistics and potential fire safety measures Versie: 431N8032/3.0, January 2009 This research study has been commissioned by the Consumer Council at the Austrian Standards Institute and was funded by the Austrian Ministry for Labour, Social Affairs and Consumer Protection. Netherlands Institute for Safety Nibra P.O. Box 7010 6801 HA Arnhem The Netherlands T +31 (0)26 355 24 00 F +31 (0)26 351 50 51 info@nifv.nl Consumer fire safety: European statistics and potential fire safety measures This research study has been commissioned by the Consumer Council at the Austrian Standards Institute and was funded by the Austrian Ministry for Labour, Social Affairs and Consumer Protection. Netherlands Institute for Safety Nibra: We develop expertise, contribute towards the professional development of the fire service, medical assistance in accidents and disasters and crisis management, and thereby enhance physical safety. Consumer fire safety: European statistics and potential fire safety measures Colophon Client: Contact: Title: Consumer Council, Austrian Standards Institute Heinestrasse 38, 1020 Vienna, Austria Dr. F. Fiala Consumer fire safety:European statistics and potential fire safety measures January 2009 Final report 3.0 431N8032 M. Kobes, MSc, BBE, MIFireE K. Groenewegen - Ter Morsche, MSc Dr. M.G. Duyvis Dr. J.G. Post (Head of the Research Department NIFV) Date: Status: Version: Project number: Authors: Project leader:...

Words: 19880 - Pages: 80

The Economist UK Edition – December 22, 2018 | Amber Blank | £0 Shipping